Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for Epson
Download for Firmware version 2.0.0.0 and higher: Juno Connect for Epson

Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for Hitachi
Download for Firmware version 2.0.0.0 and higher: Juno Connect for Hitachi

Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for Mitsubishi
Download for Firmware version 2.0.0.0 and higher: Juno Connect for Mitsubishi

Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for Sharp
Download for Firmware version 2.0.0.0 and higher: Juno Connect for Sharp

Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for Vivitek
Download for Firmware version 2.0.0.0 and higher: Juno Connect for Vivitek

Instructions & Download

This configuration file sets the behavior of Juno Connect, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Juno Connect’s IP address. If you wish to customize it with different actions or events, Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Note: There are two versions available for download depending on the version of Juno Connect you are using. To find which version you have, enter the IP address of the Juno Connect in a web browser (for more information about this see the Juno Connect Configuration Guide). In the window, on the left side, look for Product Name/Info or About (which one you will find depends on your firmware version). If your Juno Connect shows the Product Name/Info screen, look under System Firmware Information for Control firmware version. If your Juno Connect shows the About screen, look under Device Information for Firmware version. Match your version below.

Download for Control firmware version 1.9.9.9 and lower: Juno Connect for BenQ
Download for Firmware version 2.0.0.0 and higher: Juno Connect for BenQ

Instructions & Download

This is the Teacher Edition Control layout for the projector base files. The configuration files set the layout and behavior of Juno Connect, and are pre-built with controls for the projector brands most commonly used in schools. The files address the great majority of installation needs with a simple update of IP address. If you wish to customize it with different buttons, events, or actions, the Juno Connect Configuration Guide contains clear instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address from the default for each unit you're commissioning — see the Juno Connect Configuration Guide for details.

Download: Teacher Edition Control Layout

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for Epson

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for Hitachi

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for Mitsubishi

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for Sharp

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for Vivitek

Instructions & Download

This configuration file sets the behavior of the Smart Receiver, and is pre-built with controls mapped to voice commands for the projector brands most commonly used in schools. This file addresses the great majority of installation needs with a simple update of the Smart Receiver’s IP address. If you wish to customize it with different actions or events, the Smart Receiver Installer Guide contains instructions for easily adding new functionality. Instructions: Download the configuration file for the projector you are using. Remember that you will need to change the IP address of the Smart Receiver from the default for each unit you're commissioning — see the Smart Receiver Installer Guide for details.

Note: This configuration file is compatible with a Smart Receiver running firmware version 2.2.0.0 or higher. If your Smart Receiver is running a firmware version lower than 2.2.0.0, contact FrontRow Customer Care for help with a configuration file. To find which firmware version you have, enter the IP address of the Smart Receiver in a web browser (for more information about this see the Smart Receiver Installer Guide). In the window, on the left side, click About. In the About screen, look under Device Information for Firmware version.

Download for Firmware version 2.2.0.0 and higher: Smart Receiver for BenQ