ezRoom PlenumCore with Smart Receiver

ezRoom PlenumCore with Smart Receiver

MSRP*: 
$1,549.00
Product Number: 
C502
Get a Quote


* Manufacturer’s suggested retail price. Actual dealer price will vary.

Includes the following components pre-wired and installed in enclosure:

  • 2x2 Plenum ceiling enclosure
  • Smart Receiver
  • Power supply
  • US/CA power cable
  • US/CA voice commands
  • 4 harness cables
  • Network switch
  • Cable clamps
  • Nylon bushing
+ Description and Overview 
See it in 360°

The heart of the system, the FrontRow Smart Receiver is a networked amplifier, wireless mic receiver, signal processor, power distributor, and controller all in one, housed in a plenum rated 2x2 enclosure designed for drop ceilings.

  • Supports up to 5 mics and 3 audio devices like computers, mobile phones, or Blu-ray players
  • Adapto digital feedback suppression
  • OptiVoice digital EQ
  • Voice command for initiating actions
  • 2 audio outputs for lesson capture and assistive listening systems
  • Network, serial and IR connections for remote management and device control
  • IP Paging-ready
  • LED Beacon for visual queues
  • Includes network switch so only one drop to the classroom necessary
  • Includes serial cable to connect to display/projector
  • Connect HDMI devices like laptops and doc cams by adding the HDMI extender with audio de-embedding (HDMI-X1). Supports up to two HDMI extenders/audio de-embedders (HDMI-X2).
  • To add more devices to the enclosure, add a power strip (CMPL-PWR)


Technical Specifications

Specifications
ICR-01 Smart Receiver
Transmission type: Infrared
Receiving frequencies: 2.1MHz, 2.4MHz; (2.8MHz, 3.3MHz, 3.6MHz with Channel Expansion Module)
Frequency response: 50Hz – 20kHz
Signal-to-noise: >70dB
THD: <1% @ 1kHz
Maximum audio output power: 2 x 10w (8Ω), 2 x 15w (4Ω)
Power supply: 18VDC @ 3.4AMP
Network Support: 10/100 Mb/s (Auto Sensing)
Baud Rate: 2400 – 115,000 baud
Size (wxhxd): 34.92 x 16.8 x 5.5cm/13.75 x 6.5 x 2.75in
Weight: 1.72kg/3.8lbs
Inputs/Outputs
ICR-01 Smart Receiver
Input power jack (mains 18Vdc, 3.5A)
Input power jack (PoE 12-18Vdc, 30W)
(3) RCA jacks for external sensor connection
3.5mm audio out jack (with gain control)
3.5mm audio out jack (max gain output)
(3) RCA stereo audio in jacks (with stereo sound output)
(1) serial communications port
(1) RJ45 Jack Pair (supplying 12VDC to power and connectivity to control panels
(1) 5V, 1A power output (for network switch)
(1) 18V, 2A power output (for HDBaseT HDMI receiver)
(1) 5V, 1A power output (for HDMI audio de-embedder)
(1) Terminal block for analog page override
(1) RJ45 intercom input jack
(1) 3.5mm IR blaster port
(1) RJ45 Network Jack
(2) captive screw loud speaker terminals (second is optional). Left and right (stereo output)
(1) captive screw general purpose input (GPI) relay terminal
(1) captive screw RS232 serial control input/output terminal (3 position)

 

 

Downloads

User Guides Smart Receiver (ICR-01) User Guide Guide to Beacon LED Status Indicator Signals Beacon LED Status Indicator Signals (editable)
Software Teacher Edition Software 45-day trial Teacher Edition Software for licenses already purchased  
Technical Specifications ezRoom 2X2 PlenumCore Product Sheet ezRoom 2X2 Plenum Enclosure Tech Spec  
Installer Guides ezRoom Start Here Guide Smart Receiver Installer Guide PlenumCore 2x2 Installation Guide
  HDBaseT Extender Kit Installation Instructions    
Configuration Files CB2000 + Smart Receiver (ICR-01) for Epson CB2050 + Smart Receiver (ICR-01) for Epson CB6000 + Smart Receiver (ICR-01) for Epson
  CB2000 + Smart Receiver (ICR-01) for Hitachi CB2050 + Smart Receiver (ICR-01) for Hitachi CB6000 + Smart Receiver (ICR-01) for Hitachi
  CB2000 + Smart Receiver (ICR-01) for Mitsubishi CB2050 + Smart Receiver (ICR-01) for Mitsubishi CB6000 + Smart Receiver (ICR-01) for Mitsubishi
  CB2000 + Smart Receiver (ICR-01) for Sharp CB2050 + Smart Receiver (ICR-01) for Sharp CB6000 + Smart Receiver (ICR-01) for Sharp
CB2000 + Smart Receiver (ICR-01) for Vivitek (7E series) CB2000 + Smart Receiver (ICR-01) for Vivitek (V9 series) CB2050 + Smart Receiver (ICR-01) for Vivitek (7E series) CB6000 + Smart Receiver (ICR-01) for Vivitek
  CB2050 + Smart Receiver (ICR-01) for BenQ CB6000 + Smart Receiver (ICR-01) for BenQ  
  Conductor Server Update for Smart Receiver (ICR-01)    
Warranty Warranty Info    

 

+ Product Line 

ezRoom

ezRoom®: Room Control & Asset Management

Classroom AV made easy. EzRoom provides classroom AV control, great sound coverage, and AV connections  ...MORE