POE Extractor PD-20W
Allows use of POE as backup in case of mains power interruption. For CM3000, CM800S. Works with C100, C200, W300 and W400. Incl.: 1-ft UTP cable, DC power cable
This POE extractor is specially-designed to keep your critical announcements audible during a power outage.
- Keeps paging and other emergency alert functions running during a power outage: Unlike typical POE extractors, the PD-20W supplies amplifiers with the higher peak power levels they require. Offers 12VDC pass-through power for amplifier support when POE is not required, then automatically and instantly switches to POE if mains power fails.
- Works with any qualified third-party POE midspan injector and POE-enabled network switch: Supports variable POE requirements and network connectivity for CM3000, CM800 and CM800S. Installs as a bridge between the POE cable and the network endpoint, and breaks out both network and power signals from the incoming cable, sending them on as needed for amplifier support.
- Network power/data input
- Network pass-through output
- 11.2V / 1.34A (15W) output
- 12VDC input
PD-20W High-Power POE Extractor
|Network support: 10/100Mb/s (auto sensing)|
|Power supply: 12VDC at 3.5A|
|Size (WxHxD): 10.8 x 6.4 x 2.3cm/4.25 x 2.5 x .91in|
|Midspan Injector Requirements|
|POE Type: High Power Midspan Injector|
|POE Standard: POE IEEE 802.3af|
Device Pin-out: 1pins 4,5 DC power (+), pins 7,
8 DC power (-)
POE Protection: Over Temp, Over Current,
|Shielded RJ-45 Ports: 16 or 24 Ports|
Power: > 15W per Port (e.g., Tycon 16.8E,
|Technical Specifications||Technical Specifications|
|Warranty||Warranty Info (.pdf)|