POE Extractor (pre-installed)
Allows use of POE as backup in case of mains power interruption. Works with C502.
Includes the following components pre-wired and installed in an ezRoom enclosure:
- PoE extractor
- 1ft UTP cable
Click here for our POE Extractor for self-installation.
PoE Extractor for ICR-01 Smart Receiver based ezRoom.
Allows use of POE as backup in case of mains power interruption. Pre-installed in an ezRoom.
- Keeps paging and other emergency alert functions running during a power outage: The POE-X extractor supplies ezRoom with power if mains power fails. The ezRoom Smart Receiver automatically and instantly switches to PoE when a power loss is detected.
- Works with any qualified third-party POE midspan injector and POE-enabled network switch: Installs as a bridge between the POE-X cable and the network endpoint, and breaks out both network and power signals from the incoming cable, sending them on as needed for amplifier support.
- Network power/data input
- Network pass-through output
- 12V/1.75A (21W) output
- Mounts inside Plenum Enclosure
POE-X High-Power POE Extractor
|Network support: 10/100Mb/s (auto sensing)|
|Power output: 21W|
|Midspan Injector Requirements|
|POE Type: High Power Midspan Injector|
|POE Standard: POE IEEE 802.3at|
Device Pin-out: 1pins 4,5 DC power (+), pins 7,
8 DC power (-)
POE Protection: Over Temp, Over Current,
|Power: > 30W per Port|
|Technical Specifications||Technical Specifications|
|Warranty||Warranty Info (.pdf)|