Smart Receiver Voice System with Lay-In Speakers


Smart Receiver Voice System with Lay-In Speakers

Product Number: 


  • Smart Receiver, Power Supply with US/CA power cord; Teacher Edition Capture / Control licenses; 12ft audio cables; 12ft USB cable; Serial cable; CAT5 crossover cable; US/CAN firmware (SMRT-KIT)
  • Lay-in Speakers and Ceiling Sensor Kit, includes four 2x2 lay-in plenum-rated speakers for drop ceilings with plenum speaker cables and support cables. 950CS Ceiling Sensor with plenum sensor cable (SP-L2CS-4)
  • ITM-02 Pendant Microphone Kit, includes 850mAh Li-ion battery; 3.5mm - 3.5mm audio cord; micro USB cable (1000-00039)
Get a Quote

* Manufacturer’s suggested retail price. Actual dealer price will vary.
+ Description and Overview 
See it in 360°

The FrontRow Smart Receiver is a networked amplifier, wireless mic receiver, signal processor, power distributor, and controller all in one.

  • Supports up to 5 mics and 3 audio devices like computers, mobile phones, or Blu-ray players
  • Adapto digital feedback suppression
  • OptiVoice digital EQ
  • Voice command for initiating actions
  • 2 audio outputs for lesson capture and assistive listening systems
  • IP Paging-ready
  • LED Beacon for visual queues

Technical Specifications

ICR-01 Smart Receiver SP-L2CS-4 ITM-02 Pendant Microphone Kit
Transmission type: Infrared Speaker type: 8in full range cone Transmission type: Infrared
Receiving frequencies: 2.1MHz, 2.4MHz; (2.8MHz, 3.3MHz, 3.6MHz with Channel Expansion Module) Impedance:  8Ω nominal Transmitting frequency: 2.1MHz, 2.3MHz, 2.4MHz, 2.8MHz, 3.3MHz, 3.6MHz programmable
Frequency response: 50Hz – 20kHz Loudspeaker power rating: 12W-RMS EIA 426A Standard Frequency response: 70Hz – 8kHz
Signal-to-noise: >70dB Calculated maximum system output: 103dB-SPL, 12W/1M Microphone: Unidirectional cardioid
THD: <1% @ 1kHz Magnet type: 4.8oz BeFe Ceramic Battery life: 7 hours (typical)
Maximum audio output power: 2 x 10w (8Ω), 2 x 15w (4Ω) Size (WxHxD): 60.5 x 60.5 x 8.74cm / 23.82 x 23.82 x 3.44in Battery type: Li-Ion, 3.7V, 850mAH
Power supply: 18VDC @ 3.4AMP Frequency response: 65Hz – 17kHz EIA 426A standard Operating range: 24.3m/80ft, line of sight (typical)
Network Support: 10/100 Mb/s (Auto Sensing) Mounting: Replaces existing ceiling tile, mounts in tile grid, built for Plenum spaces Size (wxhxd): 7.4 x 6.6 x 1.3cm/2.9 x 2.6 x 0.5in
Baud Rate: 2400 – 115,000 baud Average sensitivity: 92dB-SPL 1W/1M Weight: 73.7g/2.6oz (with battery and lanyard)*
Size (wxhxd): 34.92 x 16.8 x 5.5cm/13.75 x 6.5 x 2.75in Audio connection: Pre-cut 17.8cm/7in *Competitor models report weight without lanyard
Weight: 1.72kg/3.8lbs Nominal coverage angle: 100˚ included angle -6dB/2kHz half space  
ICR-01 Smart Receiver SP-L2CS-4 ITM-02 Pendant Microphone Kit
Input power jack (mains 18Vdc, 3.5A)   Aux input (3.5mm)
Input power jack (PoE 12-18Vdc, 30W)   Charge/programming jack
(3) RCA jacks for external sensor connection    
3.5mm audio out jack (with gain control)    
3.5mm audio out jack (max gain output)    
(3) RCA stereo audio in jacks (with stereo sound output)    
(1) serial communications port    
(1) RJ45 Jack Pair (supplying 12VDC to power and connectivity to control panels    
(1) 5V, 1A power output (for network switch)    
(1) 18V, 2A power output (for HDBaseT HDMI receiver)    
(1) 5V, 1A power output (for HDMI audio de-embedder)    
(1) Terminal block for analog page override    
(1) RJ45 intercom input jack    
(1) 3.5mm IR blaster port    
(1) RJ45 Network Jack    
(2) captive screw loud speaker terminals (second is optional). Left and right (stereo output)    
(1) captive screw general purpose input (GPI) relay terminal    
(1) captive screw RS232 serial control input/output terminal (3 position)    
User Controls
  SP-L2CS-4 ITM-02 Pendant Microphone Kit
    Wake/mute/voice command/trigger button
    Channel select




User Guides Smart Receiver User Guide Guide to Beacon LED Status Indicator Signals  
Software Teacher Edition Software 45-day trial Teacher Edition Software for licenses already purchased  
Technical Specifications Smart Receiver Tech Spec 2x2 Lay-in Ceiling Speakers  
Installer Guides ezRoom Start Here Guide Smart Receiver Installer Guide  
  HDBaseT Extender Kit Installation Instructions Lay-in Ceiling Speaker Installer Guide  
Warranty Warranty Info    


+ Product Line 


ezRoom®: Room Control & Asset Management

Classroom AV made easy. EzRoom provides classroom AV control, great sound coverage, and AV connections  ...MORE

Floating Contact link2